ChaptersCapítulos
Four loops that sing
There is no oscillator in this instrument. Every sound it makes is the instability of a small network of feedback loops, held at the edge where it starts to ring.
01The loop
Each of the four channels is a closed circuit: a saturating preamp, a DC blocker, a band-pass filter, a fixed chain of twelve effects, a short delay, and the way back to the start. Its output is written into the delay line and read again one period later.
A loop like this oscillates where two conditions meet, the Barkhausen criterion: the gain around the loop reaches one, and the phase around the loop is a whole number of turns.
The delay τ offers a comb of candidate frequencies, k/τ. The band-pass B, at MID with its width set by FOCUS, chooses which of them get a gain of one or more. Below unity the loop is a resonator: struck, it rings and decays, as in the Karplus–Strong plucked string and its extensions by Jaffe and Smith. Above unity it cannot help sounding: a whisper of noise is enough to start it, and it grows until the preamp's saturation pulls the effective gain back down to exactly one. That equilibrium, a limit cycle, is the sustained tone. The saturation is not an effect added to the sound; it is what keeps the loop alive without exploding.
Each channel's delay is tuned to a partial of MID, from 20 Hz to 10 kHz. In HARMONIC the four loops sit on 1, 2, 3 and 4 times MID; other lists are inharmonic on purpose: BAR uses the modes of a free bar (1, 2.756, 5.404, 8.933), BELL a minor-third cluster. When a period does not fit the line of 2048 samples, the loop goes up an octave, as a real circuit would settle on its nearest possible mode.
02The network
The four loops are joined by a 4 × 4 matrix of sends: each loop's input receives the others' outputs, weighted and signed. Linear networks of delays coupled by a matrix are the classic structure of artificial reverberation (Stautner and Puckette; Jot and Chaigne), where the matrix is kept lossless so that the network decays smoothly. Here the matrix is deliberately allowed past unity, and every node saturates. The result is a set of coupled nonlinear oscillators: they beat, pull each other into lock, split into alternating regimes, or fall into chaos when the coupling is strong.
The topologies are starting points for the matrix: RING (each loop feeds the next), PAIRS, CHAIN (open, nothing returns), STAR, ALL, and TWIST, a ring whose polarity flips at every other step so the energy circulates in counter-phase. Every send can also be set by hand in the MATRIX section, one row at a time. The diagonal of the matrix is each loop's own gain. CROSS scales all the sends at once.
03The preamp and DRIVE
The preamp has a small-signal gain of one, so GAIN keeps its meaning: one is the edge. Its curve runs from a hyperbolic tangent (a soft knee) toward a hard clip as DRIVE rises. A normalised saturator in a self-oscillating loop has a property that makes a naive drive control inert: the loop settles at whatever amplitude brings its effective gain back to one, so scaling the input only moves the operating point. The distortion of a singing loop is set by how far it is above unity, not by the preamp's input level. DRIVE therefore does two things: it hardens the knee, and it multiplies the excess of loop gain above one. Below unity, where the loop is only struck, it shapes the knee alone.
04SCREAM: the loop bending its own time
Reading a delay line at a moving position is phase modulation: the read head's speed is a change of pitch, as in vibrato, chorus and flanging (Disch and Zölzer). SCREAM moves every read position by the network's own output:
where s is the knob and y the mean of the four loops' outputs. The signal now feeds back twice: as a sound into the loop, and as a modulation of the loop's own period. This self-modulation is the time-domain relative of feedback FM (Chowning's modulation index, here driven by the carrier itself). At low settings it adds sidebands and a rough edge; at high settings the four periods chase each other and the network screams.
05The fixed chain
Between the band-pass and the delay, every loop passes through the same twelve effects, always in the same order. Each has four knobs, and the fourth is a MIX between the signal before and after it; at zero the stage is skipped, so the chain with every MIX at zero is the plain loop. A fixed order is a choice for the hands: a sound is described by positions only, never by a routing, and the same knob is always in the same place.
A processor outside a loop acts once. Inside a loop, its output passes again and again through the same curve, the filter and the saturation, so the timbre is not a static waveshape but an orbit of a nonlinear map. That is why a small turn can switch the loop between regimes, from a steady tone to a period-doubled one, to a beating pair, to noise.
Saturation: FUZZ and BLAST
FUZZ is two saturating stages, the second one asymmetric, as two mismatched diodes are; the asymmetry and BIAS add even harmonics, and a DC blocker after it keeps the loop centred. BLAST is a hard clip from rail to rail, preceded by a first-order pre-emphasis (EMPHASIS) that lifts the highs before they are clipped, and followed by a low-pass (TONE). Inside a loop above unity, both work against the preamp: the stronger saturation lowers the amplitude at which the loop settles and raises the density of harmonics that return.
Folding: FOLD and WRAP
FOLD is a triangle wavefolder: past the edge, the wave is reflected back into range, as in the analog folders analysed by Esqueda, Pöntynen, Parker and Bilbao. Each additional fold adds a pair of turning points, so the spectrum grows with DEPTH in a way that clipping cannot produce. WRAP sends a peak that passes the edge to the opposite side: a modular, sawtooth-like discontinuity, brighter and harsher. SOFT and SMOOTH are a gentle low-pass after each, to tame the aliasing such sharp corners create.
Level and polarity: RECTIFY and DIVIDE
RECTIFY takes the absolute value (full wave), which doubles the fundamental, or keeps one half (half wave); a threshold (BIAS) and a tracked offset remove the DC that rectification creates. DIVIDE is a pair of flip-flops that toggle on the rising zero crossings, giving square waves one and two octaves below, scaled by the loop's own envelope. Fed back, a subharmonic offers the loop a period it can lock onto, and the loop drops an octave or splits.
Multiplication: RING
RING multiplies the loop by a carrier: either its neighbour loop or a sine of its own (FREQ). The product holds only sum and difference frequencies (Parker models the diode-based circuit); against the neighbour it is a second, nonlinear coupling between the loops, on top of the matrix. DC adds an offset to the carrier, turning ring modulation toward amplitude modulation, where the original is heard again.
Supply: STARVE
STARVE imitates a circuit on a failing supply. An envelope of the loop's level lowers the ceiling of the stage (SAG), and a dead zone (GATE) removes signals below a threshold, as crossover distortion does. RECOVER is how fast the supply comes back. In a loop the result breathes and sputters: loud passages choke, quiet ones die and restart.
Spectrum: SHIFT
SHIFT is a frequency shifter: the signal is turned into an analytic signal by a pair of all-pass chains whose outputs differ by 90° across the audio band, then multiplied by a turning phasor, which moves every component by the same number of hertz, a single-sideband modulation (Bode). Harmonic relations are broken. Inside a loop the shift is added again on every pass, so a component climbs or falls by HZ each period until it leaves the band: the endless glissandi of frequency-shifted feedback. SPREAD sets each loop a little apart; FEEDBACK is a second, local loop around the shifter.
Time: ECHO
ECHO is a short delay, 2 to 27 ms, inside each loop, with its own feedback, a slightly different time in each loop, and a slow modulation (WOW). It adds a second comb inside the first, whose teeth beat against the loop's own period.
Dynamics: PUMP
PUMP is a feed-forward compressor inside the loop (Giannoulis, Massberg and Reiss give the general design): its envelope follows the level with ATTACK and RELEASE, and the gain falls as the level rises. In a loop above unity this fights the growth: the loop swells, is pushed down, swells again, a relaxation oscillation whose rhythm is set by RELEASE.
Filter: SWEEP
SWEEP is a resonant band-pass (a state-variable filter in the topology-preserving form described by Zavalishin) whose centre is moved up from BASE by the loop's own envelope, with RANGE setting how far. It is an envelope filter, and in a loop it closes a third feedback path: the louder the loop, the higher the band, which changes what returns.
06After the network: DELAY and REVERB
Loops 1 and 3 are summed to the left, 2 and 4 to the right, and pass through the output gate. DELAY is a ping-pong delay of 10 to 120 ms: each side's repeats are fed into the other through a low-pass (TONE), so the echoes alternate and darken. REVERB is a feedback delay network of four lines (601, 743, 919 and 1097 samples, mutually prime so their echoes do not coincide), mixed by a 4 × 4 Hadamard matrix, which is orthogonal and therefore lossless, with a gain below one (SIZE) and a low-pass in each line (DAMP), as in Jot and Chaigne and in Schroeder's first designs. WIDTH spreads the outputs between the two sides. Because both come after the gate, a CUT leaves their tails ringing.
07Touch
The keys are pads. A white pad is a KICK: a short burst of coloured noise injected into one, two or all loops, from dark and long on the left to bright and short on the right. Holding a pad also keeps the loops' return path open; releasing it closes the return over 60 ms, so a loop above unity sings only while it is held, and a loop below unity rings out. DRONE latches the return open.
The black pads are gates. CUT closes the output, OPEN holds the return open without a strike, RETURN cuts the way back so the loop dies and is reborn when released. CHOP cuts the output in the network's own rhythm: it counts the rising zero crossings of the output and flips every 32, 16, 8 or 4, so the rhythm is the pitch, and it changes as the sound changes. SCATTER cuts at random intervals, around 4 to 32 per second. Every gate ramps in 0.5 ms, short enough to sound dry, long enough not to click.
08Modulation, motion and morph
Four sources can move any knob: two LFOs (a triangle and a square with softened edges, 0.05 to 20 Hz), a RANDOM that picks a new value at its rate and glides to it as much as SMOOTH allows, and FOLLOW, the network's own output level. FOLLOW is one more feedback path, slower than the audio: the louder the network, the further the knob moves, which changes how loud the network is. A sound holds up to eight such assignments, each with a signed depth.
MOTION records the knobs' positions while it is held, 40 points per lane over the length of the hold (up to 8 s), and plays them back as a loop. MORPH treats a sound as a vector of positions and moves linearly from the current one to a stored one; the lists that cannot be interpolated (topology, partials, the modulations) change at the midpoint.
09Controls that spread over their travel
A feedback network concentrates its interesting behaviour in narrow regions: GAIN changes almost nothing until it nears one, then everything at once. A linear knob would waste most of its turn. Each knob, the effects' knobs included, is therefore mapped through a 17-point curve built from measurement: the knob is stepped across its range on reference sounds, the audible change between neighbouring steps is measured as a spectral distance, and the curve is the inverse of the accumulated change, so that equal turns become equal steps to the ear. GAIN keeps a wide region around unity, where the loop passes from struck to singing.
The keyboard can also act as a ribbon: with RIBBON held, the 27 keys are 27 positions of the last knob touched, so a jump across the whole travel is a single touch, and a slide is a sweep.
10The screen tells the truth
Nothing on the screen is drawn from a formula about what the sound should be. A lamp's light is the RMS of its loop as it reaches the output (so a gated or muted loop goes dark); its red ring measures how much the preamp compresses; each line's brightness is the RMS of what passes on that send. When a control is touched, its name and its value as the sound has it (hertz, semitones, decibels, the real loop gain) are written large for a moment, then the lamps return.
11Lineage
The closest musical ancestor is the no-input mixing board: a mixer whose outputs are patched back into its inputs, played on its equalisers and auxiliary sends, a practice that grew in the Japanese and European improvised and noise scenes from the late 1990s. FAÍSCA keeps its anatomy (preamps, equalisers, auxiliary sends between channels, a floor of hiss that starts everything) and makes it small, repeatable and playable with one hand on the pads. The broader framework is the analysis of feedback as a musical system, in which the performer steers an unstable process rather than triggering sounds (Sanfilippo and Valle), the ecosystemic view of signal processing, where the sound is the interface (Di Scipio), and the long practice of microphone and loudspeaker feedback as an instrument (van Eck).
12Implementation
One small C core, with no library and no function from a math library, runs on the instrument and in the browser. The browser version is that same core compiled to WebAssembly and run in the audio thread at 44.1 kHz; the screen is the core's own 240 × 240 frame, drawn in bands of 16 rows as the device does. Each loop has a line of 2048 samples; coefficients are recomputed every 16 samples, so the sample loop only multiplies and adds. The panel reads the controls once per audio block. A limiter, always on, keeps the output at or below −3 dBFS with an instant attack and a 150 ms release, followed by a soft ceiling. The source is GPL-3.0.
Quatro laços que cantam
Não há oscilador neste instrumento. Todo som que ele faz é a instabilidade de uma pequena rede de laços de realimentação, mantida na beira em que ela começa a soar.
01O laço
Cada um dos quatro canais é um circuito fechado: um pré-amplificador que satura, um bloqueio de DC, um filtro passa-banda, uma cadeia fixa de doze efeitos, um atraso curto e o caminho de volta ao início. A saída é gravada na linha de atraso e lida de novo um período depois.
Um laço assim oscila onde duas condições se encontram, o critério de Barkhausen: o ganho ao longo do laço chega a um, e a fase ao longo do laço é um número inteiro de voltas.
O atraso τ oferece um pente de frequências candidatas, k/τ. O passa-banda B, no MID, com a largura dada pelo FOCUS, escolhe quais delas recebem ganho um ou mais. Abaixo da unidade o laço é um ressonador: golpeado, ele soa e decai, como na corda dedilhada de Karplus–Strong e nas extensões de Jaffe e Smith. Acima da unidade ele não consegue ficar quieto: um sopro de ruído basta para dar a partida, e ele cresce até a saturação do pré puxar o ganho efetivo de volta a exatamente um. Esse equilíbrio, um ciclo-limite, é o som sustentado. A saturação não é um efeito somado ao som; é o que mantém o laço vivo sem explodir.
O atraso de cada canal se afina numa parcial do MID, de 20 Hz a 10 kHz. Em HARMONIC os quatro laços ficam em 1, 2, 3 e 4 vezes o MID; outras listas são inarmônicas de propósito: BAR usa os modos de uma barra livre (1; 2,756; 5,404; 8,933), BELL um aglomerado de terças menores. Quando um período não cabe na linha de 2048 amostras, o laço sobe uma oitava, como um circuito real se acomodaria no modo possível mais próximo.
02A rede
Os quatro laços são ligados por uma matriz 4 × 4 de envios: a entrada de cada laço recebe as saídas dos outros, com peso e sinal. Redes lineares de atrasos acopladas por uma matriz são a estrutura clássica da reverberação artificial (Stautner e Puckette; Jot e Chaigne), em que a matriz é mantida sem perdas para que a rede decaia de forma suave. Aqui a matriz pode, de propósito, passar da unidade, e cada nó satura. O resultado é um conjunto de osciladores não lineares acoplados: eles batem, puxam uns aos outros até travar juntos, se dividem em regimes alternados ou caem no caos quando o acoplamento é forte.
As topologias são pontos de partida para a matriz: RING (cada laço alimenta o próximo), PAIRS, CHAIN (aberta, nada volta), STAR, ALL e TWIST, um anel cuja polaridade inverte a cada dois passos, de modo que a energia circula em contrafase. Cada envio também pode ser ajustado à mão na seção MATRIX, uma linha de cada vez. A diagonal da matriz é o ganho de cada laço. CROSS escala todos os envios de uma vez.
03O pré e o DRIVE
O pré tem ganho um para sinais pequenos, então GAIN mantém o seu sentido: um é a beira. A curva vai de uma tangente hiperbólica (um joelho suave) a um corte duro conforme o DRIVE sobe. Um saturador normalizado num laço que oscila sozinho tem uma propriedade que torna inerte um controle de drive ingênuo: o laço se acomoda na amplitude que traz o ganho efetivo de volta a um, de modo que escalar a entrada só move o ponto de operação. A distorção de um laço que canta é dada pelo quanto ele está acima da unidade, não pelo nível de entrada do pré. Por isso o DRIVE faz duas coisas: endurece o joelho e multiplica o excesso de ganho do laço acima de um. Abaixo da unidade, onde o laço só é golpeado, ele molda apenas o joelho.
04SCREAM: o laço curvando o próprio tempo
Ler uma linha de atraso numa posição que se move é modulação de fase: a velocidade da cabeça de leitura é uma mudança de altura, como no vibrato, no chorus e no flanger (Disch e Zölzer). O SCREAM move cada posição de leitura pela própria saída da rede:
em que s é o knob e y a média das saídas dos quatro laços. O sinal agora realimenta duas vezes: como som que entra no laço e como modulação do próprio período do laço. Essa automodulação é parente, no domínio do tempo, da FM com realimentação (o índice de modulação de Chowning, aqui movido pela própria portadora). Em valores baixos, acrescenta bandas laterais e aspereza; em valores altos, os quatro períodos perseguem uns aos outros e a rede grita.
05A cadeia fixa
Entre o passa-banda e o atraso, todo laço passa pelos mesmos doze efeitos, sempre na mesma ordem. Cada um tem quatro knobs, e o quarto é um MIX entre o sinal antes e depois dele; no zero o estágio é pulado, de modo que a cadeia com todos os MIX no zero é o laço puro. A ordem fixa é uma escolha para as mãos: um som se descreve só por posições, nunca por um roteamento, e o mesmo knob está sempre no mesmo lugar.
Um processador fora de um laço age uma vez. Dentro de um laço, a saída passa de novo e de novo pela mesma curva, pelo filtro e pela saturação, então o timbre não é uma forma de onda estática, e sim a órbita de um mapa não linear. É por isso que um giro pequeno pode levar o laço de um regime a outro: de um tom estável a um de período dobrado, a um par que bate, ao ruído.
Saturação: FUZZ e BLAST
O FUZZ são dois estágios de saturação, o segundo assimétrico, como dois diodos desemparelhados; a assimetria e o BIAS acrescentam harmônicos pares, e um bloqueio de DC depois mantém o laço centrado. O BLAST é um corte duro de trilho a trilho, precedido por uma pré-ênfase de primeira ordem (EMPHASIS), que realça os agudos antes do corte, e seguido por um passa-baixa (TONE). Dentro de um laço acima da unidade, os dois trabalham contra o pré: a saturação mais forte baixa a amplitude em que o laço se acomoda e aumenta a densidade de harmônicos que voltam.
Dobra: FOLD e WRAP
O FOLD é um dobrador de onda triangular: passada a borda, a onda é refletida de volta para dentro, como nos dobradores analógicos analisados por Esqueda, Pöntynen, Parker e Bilbao. Cada dobra a mais acrescenta um par de pontos de virada, então o espectro cresce com o DEPTH de um jeito que o corte não produz. O WRAP manda o pico que passa da borda para o lado oposto: uma descontinuidade modular, como uma dente de serra, mais clara e mais áspera. SOFT e SMOOTH são um passa-baixa suave depois de cada um, para domar o aliasing que cantos tão agudos criam.
Nível e polaridade: RECTIFY e DIVIDE
O RECTIFY toma o valor absoluto (onda completa), que dobra a fundamental, ou guarda uma metade (meia onda); um limiar (BIAS) e um desvio acompanhado retiram o DC que a retificação cria. O DIVIDE é um par de flip-flops que trocam de estado nas passagens por zero subindo, dando ondas quadradas uma e duas oitavas abaixo, escaladas pelo envelope do próprio laço. Realimentado, um sub-harmônico oferece ao laço um período em que ele pode travar, e o laço cai uma oitava ou se divide.
Multiplicação: RING
O RING multiplica o laço por uma portadora: o laço vizinho ou uma senoide própria (FREQ). O produto só tem as frequências de soma e de diferença (Parker modela o circuito com diodos); contra o vizinho, é um segundo acoplamento, não linear, entre os laços, além da matriz. O DC soma um desvio à portadora e leva a modulação em anel para a modulação de amplitude, em que o som original volta a ser ouvido.
Fonte: STARVE
O STARVE imita um circuito com a alimentação falhando. Um envelope do nível do laço baixa o teto do estágio (SAG), e uma zona morta (GATE) remove os sinais abaixo de um limiar, como faz a distorção de cruzamento. RECOVER é a rapidez com que a fonte se recupera. No laço, o resultado respira e engasga: os trechos fortes sufocam, os fracos morrem e recomeçam.
Espectro: SHIFT
O SHIFT é um deslocador de frequência: o sinal vira um sinal analítico por um par de cadeias passa-tudo cujas saídas diferem de 90° ao longo da faixa de áudio, e é multiplicado por um fasor que gira, o que move cada componente pelo mesmo número de hertz, uma modulação de banda lateral única (Bode). As relações harmônicas se quebram. Dentro de um laço o deslocamento se soma a cada volta, então um componente sobe ou desce HZ a cada período até sair da banda: os glissandos sem fim da realimentação com deslocamento de frequência. SPREAD afasta um pouco cada laço; FEEDBACK é um segundo laço, local, em volta do deslocador.
Tempo: ECHO
O ECHO é um atraso curto, de 2 a 27 ms, dentro de cada laço, com realimentação própria, um tempo um pouco diferente em cada laço e uma modulação lenta (WOW). Ele acrescenta um segundo pente dentro do primeiro, cujos dentes batem contra o período do próprio laço.
Dinâmica: PUMP
O PUMP é um compressor por antecipação dentro do laço (Giannoulis, Massberg e Reiss dão o desenho geral): o envelope segue o nível com ATTACK e RELEASE, e o ganho cai conforme o nível sobe. Num laço acima da unidade, ele briga com o crescimento: o laço incha, é empurrado para baixo, incha de novo, uma oscilação de relaxação cujo ritmo é dado pelo RELEASE.
Filtro: SWEEP
O SWEEP é um passa-banda ressonante (um filtro de variáveis de estado na forma que preserva a topologia, descrita por Zavalishin) cujo centro sobe a partir do BASE pelo envelope do próprio laço, com o RANGE dizendo quanto. É um filtro de envelope e, no laço, fecha um terceiro caminho de realimentação: quanto mais alto o laço, mais aguda a banda, o que muda o que volta.
06Depois da rede: DELAY e REVERB
Os laços 1 e 3 somam à esquerda, 2 e 4 à direita, e passam pelo portão de saída. O DELAY é um pingue-pongue de 10 a 120 ms: as repetições de cada lado entram no outro por um passa-baixa (TONE), então os ecos alternam e escurecem. O REVERB é uma rede de atrasos realimentada de quatro linhas (601, 743, 919 e 1097 amostras, primos entre si para que os ecos não coincidam), misturadas por uma matriz de Hadamard 4 × 4, que é ortogonal e portanto sem perdas, com um ganho abaixo de um (SIZE) e um passa-baixa em cada linha (DAMP), como em Jot e Chaigne e nos primeiros desenhos de Schroeder. WIDTH abre as saídas entre os dois lados. Como os dois vêm depois do portão, um CUT deixa as caudas soando.
07Toque
As teclas são pads. Um pad branco é um KICK: um sopro curto de ruído colorido injetado em um, dois ou nos quatro laços, do escuro e longo à esquerda ao claro e curto à direita. Segurar um pad também mantém aberto o caminho de volta dos laços; soltar fecha a volta em 60 ms, de modo que um laço acima da unidade só canta enquanto o pad é seguro, e um laço abaixo da unidade soa até sumir. O DRONE trava a volta aberta.
Os pads pretos são portões. CUT fecha a saída, OPEN segura a volta aberta sem golpe, RETURN corta a volta para que o laço morra e renasça ao soltar. CHOP corta a saída no ritmo da própria rede: conta as passagens por zero subindo e troca a cada 32, 16, 8 ou 4, então o ritmo é a altura, e muda quando o som muda. SCATTER corta em intervalos ao acaso, de cerca de 4 a 32 por segundo. Todo portão faz rampa em 0,5 ms, curto o bastante para soar seco, longo o bastante para não estalar.
08Modulação, motion e morph
Quatro fontes podem mover qualquer knob: dois LFOs (um triângulo e uma quadrada de bordas suavizadas, de 0,05 a 20 Hz), um RANDOM que sorteia um valor novo no seu ritmo e desliza até ele tanto quanto o SMOOTH permite, e o FOLLOW, o nível de saída da própria rede. O FOLLOW é mais um caminho de realimentação, mais lento que o áudio: quanto mais alta a rede, mais o knob se move, o que muda o quanto a rede soa alto. Um som guarda até oito dessas atribuições, cada uma com uma profundidade com sinal.
O MOTION grava as posições dos knobs enquanto está seguro, 40 pontos por trilha ao longo do tempo segurado (até 8 s), e as toca de volta em laço. O MORPH trata um som como um vetor de posições e anda em linha reta do atual até um guardado; as listas que não se interpolam (topologia, parciais, as modulações) trocam no meio do caminho.
09Controles que se espalham pelo curso
Uma rede de realimentação concentra o comportamento interessante em regiões estreitas: o GAIN quase não muda nada até chegar perto de um, e então muda tudo de uma vez. Um knob linear desperdiçaria a maior parte do giro. Por isso cada knob, os dos efeitos incluídos, passa por uma curva de 17 pontos construída por medição: o knob é percorrido em passos sobre sons de referência, a mudança audível entre passos vizinhos é medida como uma distância espectral, e a curva é a inversa da mudança acumulada, de modo que giros iguais viram passos iguais para o ouvido. O GAIN guarda uma região larga em volta da unidade, onde o laço passa de golpeado a cantando.
O teclado também pode virar um ribbon: com o RIBBON seguro, as 27 teclas são 27 posições do último knob mexido, então um salto pelo curso inteiro é um toque só, e deslizar é varrer.
10A tela diz a verdade
Nada na tela é desenhado a partir de uma fórmula sobre o que o som deveria ser. A luz de uma lâmpada é o RMS do laço como ele chega à saída (então um laço cortado ou mudo apaga); o anel vermelho mede o quanto o pré comprime; o brilho de cada linha é o RMS do que passa naquele envio. Quando um controle é tocado, o nome e o valor como o som o tem (hertz, semitons, decibéis, o ganho real do laço) aparecem grandes por um instante, e então as lâmpadas voltam.
11Linhagem
O ancestral musical mais próximo é a mesa sem entrada (no-input mixing board): um mixer cujas saídas voltam às próprias entradas, tocado nos equalizadores e nos envios auxiliares, uma prática que cresceu nas cenas de improvisação e de ruído do Japão e da Europa a partir do fim dos anos 1990. O FAÍSCA guarda a anatomia dela (pré-amplificadores, equalizadores, envios auxiliares entre canais, um chão de chiado que dá a partida) e a torna pequena, repetível e tocável com uma mão nos pads. O quadro mais amplo é a análise da realimentação como sistema musical, em que quem toca conduz um processo instável em vez de disparar sons (Sanfilippo e Valle), a visão ecossistêmica do processamento de sinal, em que o som é a interface (Di Scipio), e a longa prática da microfonia de microfones e alto-falantes como instrumento (van Eck).
12Implementação
Um pequeno núcleo em C, sem biblioteca e sem função de biblioteca matemática, roda no instrumento e no navegador. A versão do navegador é esse mesmo núcleo compilado para WebAssembly e rodando na thread de áudio a 44,1 kHz; a tela é o próprio quadro de 240 × 240 do núcleo, desenhado em faixas de 16 linhas como no aparelho. Cada laço tem uma linha de 2048 amostras; os coeficientes são recalculados a cada 16 amostras, de modo que o laço por amostra só multiplica e soma. O painel lê os controles uma vez por bloco de áudio. Um limitador, sempre ligado, mantém a saída em −3 dBFS ou abaixo, com ataque instantâneo e soltura de 150 ms, seguido de um teto suave. O código é GPL-3.0.
References
Referências
- Barkhausen, H. (1935). Lehrbuch der Elektronen-Röhren und ihrer technischen Anwendungen, vol. 3. Leipzig: Hirzel.
- Bode, H. (1984). History of electronic sound modification. Journal of the Audio Engineering Society, 32(10), 730–739.
- Chowning, J. M. (1973). The synthesis of complex audio spectra by means of frequency modulation. Journal of the Audio Engineering Society, 21(7), 526–534.
- Di Scipio, A. (2003). ‘Sound is the interface’: from interactive to ecosystemic signal processing. Organised Sound, 8(3), 269–277.
- Disch, S., & Zölzer, U. (1999). Modulation and delay line based digital audio effects. Proceedings of the 2nd COST G-6 Workshop on Digital Audio Effects (DAFx-99), Trondheim.
- Esqueda, F., Pöntynen, H., Parker, J. D., & Bilbao, S. (2017). Virtual analog models of the Lockhart and Serge wavefolders. Applied Sciences, 7(12), 1328.
- Giannoulis, D., Massberg, M., & Reiss, J. D. (2012). Digital dynamic range compressor design: a tutorial and analysis. Journal of the Audio Engineering Society, 60(6), 399–408.
- Jaffe, D. A., & Smith, J. O. (1983). Extensions of the Karplus-Strong plucked-string algorithm. Computer Music Journal, 7(2), 56–69.
- Jot, J.-M., & Chaigne, A. (1991). Digital delay networks for designing artificial reverberators. 90th Convention of the Audio Engineering Society, Paris, preprint 3030.
- Karplus, K., & Strong, A. (1983). Digital synthesis of plucked-string and drum timbres. Computer Music Journal, 7(2), 43–55.
- Parker, J. (2011). A simple digital model of the diode-based ring-modulator. Proceedings of the 14th International Conference on Digital Audio Effects (DAFx-11), Paris.
- Sanfilippo, D., & Valle, A. (2013). Feedback systems: an analytical framework. Computer Music Journal, 37(2), 12–27.
- Schroeder, M. R. (1962). Natural sounding artificial reverberation. Journal of the Audio Engineering Society, 10(3), 219–223.
- Smith, J. O. (1992). Physical modeling using digital waveguides. Computer Music Journal, 16(4), 74–91.
- Stautner, J., & Puckette, M. (1982). Designing multi-channel reverberators. Computer Music Journal, 6(1), 52–65.
- Van Eck, C. (2017). Between Air and Electricity: Microphones and Loudspeakers as Musical Instruments. New York: Bloomsbury.
- Zavalishin, V. (2018). The Art of VA Filter Design, rev. 2.1.0. Native Instruments.
- Zölzer, U. (Ed.). (2011). DAFX: Digital Audio Effects (2nd ed.). Chichester: Wiley.